Vaporizers & Process Equipment
Ambient air vaporizers, pressure build-up systems, manifolds and the process equipment that completes an installation.
A tank without correctly sized evaporation is a bottleneck. We supply ambient air vaporizers for LIN, LOX, LAR, LNG and LCO2 duties, pressure build-up coils, gas manifolds, pressure regulation and the balance-of-plant process equipment that turns stored liquid into a stable gas supply. Sizing is done against your real draw profile, including winter conditions, because a vaporizer that works in July and frosts solid in January was never sized, only sold.
What we supply
Ambient air vaporizers
Finned aluminum vaporizers across the common capacity range, single units or switchable banks for continuous duty.
Pressure build-up systems
PB coils and regulation keeping tank pressure stable across the draw profile.
Manifolds and regulation
High pressure manifolds, switchover systems and regulation panels for cylinder and bulk supply.
Process equipment
Piping components, safety devices and instrumentation completing the installation scope.
Need it faster than a fabrication slot?
Some of this equipment is available from stock, new or certified pre-owned. Ask for the current list before you commit to a long lead time.
Scope and approach
Vaporizer sizing starts from three numbers: peak flow, duty cycle and design ambient temperature. We ask for them before quoting, and when continuous duty is involved we quote switchable banks with defrost cycles rather than a single oversized unit.
Process equipment is quoted either as part of a tank package or standalone for upgrades of existing installations.
Typical parameters
Values below describe the common range we work in. Exact figures are confirmed per unit and per project in the offer.
| Parameter | Typical range |
|---|---|
| Vaporizer capacity | Approx. 50 to 10,000+ Nm³/h per bank |
| Duty | Intermittent single units or switchable continuous banks |
| Materials | Aluminum fins, stainless process piping |
| Pressure range | Matched to tank working pressure and downstream need |
| Controls | Manual or automatic switchover and regulation |
| Design codes | PED / EN or ASME components, per market |
Indicative values, not a fabrication commitment. Each offer states the exact specification of the quoted equipment.
How an order runs
Sized from the draw profile, delivered ready to pipe.
- 1
Draw profile
Peak flow, duty cycle and ambient design conditions define the sizing.
- 2
Offer
Configuration, capacity and switchover logic stated per unit with pricing.
- 3
Supply
New units from production, or inspected pre-owned equipment when available and suitable.
- 4
Installation support
Connection guidance or full installation with the tank package.
Typical applications
Where this equipment fits.
Customer station send-out
Evaporation behind storage tanks at industrial and medical sites.
Filling plant duty
Continuous high-flow evaporation with switchable banks at gas plants.
Upgrades and debottlenecking
Replacing undersized vaporizers that limit existing installations.
Frequently asked
My vaporizer frosts over in winter. What now?
That is a sizing or duty cycle problem. Send us the unit's capacity, your draw profile and location; the fix is usually a switchable second bank or a correctly sized replacement, and we will tell you which, with numbers.
Can you supply just the vaporizer without a tank?
Yes, vaporizers and process equipment are quoted standalone for existing installations.
Are pre-owned vaporizers worth it?
Often yes, since fins and piping are inspectable and the units have no vacuum to degrade. Condition and any refurbishment scope are stated in the offer.
Vaporizer undersized or frosting over?
Send capacity and draw profile; the fix comes back with numbers.
Ask about vaporizers